...
JIANPAI lab case study cover: yellow vitamin pellets, first-trial process success from a customer sample
Yellow Vitamin Pellets Case Study: First-Trial Process Success
A customer needed yellow vitamin pellets for a capsule product, and sent only a finished sample. There...
CIPM 2026 Q&A cover: pellet and 3-in-1 granulation at JIANPAI booth
CIPM 2026 Q&A: Centrifugal Granulation vs. Extrusion and the 3-in-1 Granulator
From October 27 to 29, 2026, the 68th China National Pharmaceutical Machinery Expo (CIPM 2026) filled...
CIPM 2026 Q&A cover: smart OSD, mixing and coating at JIANPAI booth 2-B27
CIPM 2026 Q&A: Smart OSD Manufacturing, Triple-Eccentric Mixing and Coating
At CIPM 2026 in Xiamen (October 27-29, 2026), visitors to JIANPAI Booth 2-B27 did not ask for brochures....
JianPai Technology team at CIPM 2026 Xiamen
JianPai Technology Concludes Successful Participation at CIPM 2026 Xiamen
JianPai Technology wraps up CIPM 2026 Xiamen at Booth 2-B27 (Oct 27–29): fluid bed and high-shear granulators,...

ABOUT US

About Us - Introducing our team,
mission, and values.

Tablet Manufacturing Process: Complete Step-by-Step OSD Guide

Tablet Manufacturing Process: Complete Step-by-Step OSD Guide

1. Introduction

Pharma tablet manufacturing is a complex process that requires precision, advanced machinery, and strict quality standards. Unlike simple food or cosmetic production, tablet production involves the formulation of drugs, selecting the right tablet composition, and following exact tablet manufacturing steps to ensure safety, efficacy, and consistency. Each pill manufacturing process combines science and engineering to transform powders into finished tablets that patients can trust.

2. Tools and Equipment

High-quality tableting manufacturing relies on specialized equipment. Some of the most important tools include:

Equipment Function
Tablet Press Machine Compresses powder or granules into tablets (single punch for small batches, rotary press for large-scale production).
Granulator Prepares powder through wet or dry granulation to improve flowability.
Hopper & Feeder System Ensures smooth and consistent transfer of powder into the die cavity.
Die and Punch Set Defines tablet size, shape, and thickness.
Drying Machine Removes excess moisture after granulation.
Stainless Steel Containers Stores raw materials and finished tablets to prevent contamination.
Quality Control Tools Checks weight, hardness, thickness, and uniformity.

3. Pill Manufacturing Process

The tablet making procedure consists of several crucial steps. Skipping or mishandling any stage can compromise tablet quality.

3.1 Preparing the Powder

The manufacturing tablet process begins with preparing the raw materials. Proper formulation of drugs ensures active ingredients are blended with excipients such as binders, fillers, and disintegrants. The powder or granules must have good flowability, uniform particle size, and controlled moisture content to avoid sticking and ensure smooth compression.

3.2 Loading Material into the Hopper

The prepared material is transferred to the hopper of a tablet press machine. Automated feeders ensure consistent flow into the dies, while manual presses may require careful hand-loading to achieve uniformity.

3.3 Die Cavity Filling

The feeder system directs the powder into die cavities. Here, the lower punch forms the base, and the correct dosage of material fills the cavity. Proper filling is critical for maintaining accurate drug strength and weight consistency.

3.4 Tablet Compression

This is the heart of tablet production. The upper punch applies controlled pressure while the lower punch supports the material, compacting the powder into a solid tablet. Adjusting compression force is essential for achieving the desired hardness, thickness, and durability.

3.5 Tablet Ejection

Once compressed, the upper punch retracts, and the lower punch pushes the tablet out of the die cavity. Automated presses smoothly discharge tablets into a collection chute, while manual presses require hand removal.

3.6 Collection and Quality Inspection

After ejection, tablets are gathered and inspected. Automated systems check for uniform size, weight, thickness, and appearance. Any defective tablets—such as those with cracks, chips, or capping—are removed to ensure only high-quality tablets move forward.
Rotary tablet press turret compressing white tablets during the tablet manufacturing process

4. Post-Production Considerations for Tablet Manufacturing

The pill manufacturing process doesn’t end at compression. Several post-production steps guarantee that patients receive safe, effective, and stable medications.

4.1 Quality Assurance and Control

Each batch undergoes rigorous testing to verify tablet composition, dissolution rate, hardness, and uniformity. Consistent monitoring ensures compliance with pharmaceutical standards.

4.2 Tablet Press Machine Maintenance

To maintain smooth tableting manufacturing, punches, dies, and feeder systems must be serviced regularly. Proper calibration prevents issues like sticking, capping, or thickness variations.

4.3 Workplace and Operator Safety

Since fine powders and potent drugs are involved, safety is paramount. Operators must use PPE (gloves, masks, goggles), while ventilation and dust-extraction systems minimize contamination and exposure.

4.4 Post-Press Tablet Handling

Tablets are carefully transferred for drying (if needed), checked again for defects, and moved into stainless steel containers to prevent contamination.

4.5 Storage and Packaging

Finally, tablets are packaged in blister packs, bottles, or sealed containers under controlled conditions. Proper labeling, batch tracking, and protective packaging ensure drug stability and patient safety.

The Complete Oral Solid Dosage (OSD) Tablet Manufacturing Flow

The compression steps above are only part of the story. In most pharmaceutical plants, powders are first converted into granules so they flow evenly into the die and compress into tablets with consistent weight and hardness. The flowchart below shows the full wet granulation route, followed by the equipment used at each step.

Tablet manufacturing process flowchart from dispensing and granulation to coating and packaging

Step Purpose Typical equipment
1. Dispensing Weigh APIs and excipients to the batch formula Dispensing booth and scales
2. Milling and sieving Break agglomerates and control raw material particle size Pharma mills, e.g. JGF-B grinder
3. Dry mixing Pre-mix the API with excipients Mixing phase of a high shear mixer granulator
4. Wet granulation Add binder solution to form dense granules JHZ-C or JHZ-D high shear granulators
5. Drying Reduce granule moisture to the target level JFG-C fluid bed dryer
6. Dry sizing Break oversized granules to a uniform size JZL sizing granulator or JFZ-B crushing granulator
7. Final blending Blend granules with disintegrant and lubricant JPH three-eccentricity mixer (pharma blenders)
8. Compression Compress the blend into tablets Tablet press, fed by material handling equipment
9. Coating Apply film, sugar or enteric coating Tablet coating machines, e.g. JGB-D
10. Inspection and packaging Test quality and pack in blisters or bottles QC laboratory and packaging line

Alternative routes: direct compression and dry granulation

If the formulation flows and compresses well, direct compression skips steps 3 to 6. For moisture- or heat-sensitive APIs, dry granulation (roller compaction or slugging) replaces wet granulation and drying. Learn more in dry granulation vs. wet granulation and high shear granulation vs. fluid bed granulation.

Integrated and closed lines

Steps 3 to 6 can be linked into a single closed system, such as a totally enclosed granulating production line or the 3-in-1 granulator, which reduces manual transfer, dust exposure and cross-contamination risk. For line planning, see how to plan an efficient solid dosage production line.

5. Conclusion

The tablet making procedure is both an art and a science, requiring precise formulation, advanced machinery, and strict quality control. From preparing powders to press tablets, every step of the tablet manufacturing process ensures that patients receive effective and reliable medications. By combining careful formulation of drugs, high-quality tablet press machines, and rigorous safety standards, pharmaceutical companies deliver tablets that meet global healthcare needs.

FAQ

What are the main steps of the tablet manufacturing process?

For the wet granulation route: dispensing, milling and sieving, dry mixing, wet granulation, drying, dry sizing, final blending, compression, coating, and inspection and packaging.

What is the difference between direct compression and granulation?

Direct compression blends powders and compresses them straight away, which suits free-flowing, compressible formulations. Granulation (wet or dry) first builds granules to improve flow, density and content uniformity.

Which equipment is used in tablet manufacturing?

Typical equipment includes a pharma mill, high shear mixer granulator, fluid bed dryer, sizing granulator, blender, tablet press, tablet coating machine and packaging equipment.

Why are tablets coated?

Coating protects the tablet from moisture and light, masks taste, improves swallowing and appearance, and with functional coatings can delay or control drug release.

How is tablet quality checked?

In-process and release tests cover weight variation, hardness, thickness, friability, disintegration, dissolution and content uniformity.

Planning a tablet production line?

JIANPAI supplies the granulation, drying, sizing, blending and coating steps of the tablet process. Send us your product and target output for a line proposal.

Email: [email protected] | Tel: +86 577-86932456 | No. 989 Lingde Road, Oujiangkou New District, Wenzhou, Zhejiang, China

en_USEN

Tell Us Your Requirements Questions Needs Ideas Plans